It is more vital than ever during the chilly winter months, when there is a higher risk of snow and ice on the roadways, to ensure your brakes are properly maintained. Inadequate brake maintenance not only decreases your vehicle’s lifetime and performance, but it also adds to accidents, injuries, and road deaths.
Your vehicle’s braking system is sophisticated, yet it’s surprisingly simple to repair yourself. It is critical that you examine and fix each component to verify that all elements are in functioning condition. These components include the master cylinder and brake line, as well as the brake pads, callipers, and rotors.
The handbook for your vehicle should provide a suggested brake maintenance plan; however, a reasonable rule of thumb is to check your brake pads every 12,000 miles and replace your fluid every 25,000 miles. These figures are based on your car and driving habits. A competent auto garage for Brakes repairs in Hertfordshire will be able to identify the appropriate brakes for your car as well as execute any other more difficult maintenance and repairs that are required.
Here are five brake maintenance tips to keep you safe on the road:
Flushing the brake fluid is recommended:
Pressure builds up when you compress the brake pedal and is carried through the braking fluid from the master cylinder, down the brake lines, and into the callipers, where it is supplied to the brake pads and rotors. Brake fluid is essential since it acts as a channel between you and your vehicle’s braking system.
Brake fluid, on the other hand, attracts moisture, which can be harmful to your braking system. Moisture in brake fluid increases corrosion of the brake’s metal components, decreases the fluid’s boiling point, and reduces braking performance.
Brake fluid should be checked and replenished every 25 thousand miles. A muddy or milky look indicates that the fluid should be replenished.
Examine the brake pads and rotors:
The point of contact between your braking system and your tyres is the brake pads and rotors. Some components decay faster than others and need more regular repair. Friction between the tyres and the brake pads generates heat, which wears the brake pad down. It is critical to evaluate the quality and depth of the pads to ensure adequate resistance.
If you find that you need to push the brake pedal more forcefully, smell a burning odor, or the distance it takes to stop rises significantly, it may be time to inspect and replace your brake pads and rotors. To inspect your brake pads and rotors at home, just remove the tyre.
Remove the brake lines:
In addition to cleaning the brake lines to replace the braking fluid, bleed the brake lines to eliminate extra air. When tiny volumes of air become caught inside the brake line, it can diminish the braking system’s effectiveness.
Bleeding the system involves removing air from the brake line by depressing the brake pedal while adjusting the bleeder valve, and it should be done every two to three years. This may be done as part of a routine brake inspection.